For a useful precision-grinding quotation, identify which surfaces need grinding, what each finished surface must meet, and which drawing revision governs the work. Include the part’s material and incoming condition, the required quantity, and any acceptance evidence the buyer needs. A note saying only “precision grind” or “fine finish” leaves the supplier to guess at the functional surfaces and acceptance criteria.
This guide is for buyers and tooling engineers preparing an enquiry for ground mold, die or stamping-tooling components. It helps organize a drawing-based review. It does not assign tolerances to an unspecified part or promise that a particular process or supplier can meet them.
Start with the part and the supply scope
Send the controlled part number, revision, units and drawing or model. Identify the mating assembly when it explains a critical surface. State whether the quotation is for a complete component, a proposed finishing operation on a buyer-supplied part, or a review of an unresolved requirement. A buyer-supplied part is an enquiry and technical-feasibility scenario, not an unconditional HESENT service or incoming-part acceptance commitment. The supplier must confirm the specific scope before quoting it.
Mark the surfaces that require grinding. Separate a functional bore, outside diameter, locating face or seating surface from features that merely appear on the same drawing. If some surfaces must remain as supplied, identify them too. A supplier should not infer from one tight feature that every surface requires the same finish.
For a broader drawing and purchasing package, use HESENT’s general RFQ preparation guide. The present checklist deals specifically with ground features and their acceptance.
Put finished size and geometry on the right features
List the finished dimensions, limits and units for each ground feature. A nominal diameter alone does not state the permissible size range. If the part works with a mating pin, bushing, plate or housing, provide the counterpart drawing or the interface requirements that control the fit. HESENT’s CNC bushing and locating-pin fit guide discusses those mating-interface decisions in more detail.
Size and geometry are separate questions. If roundness, cylindricity, flatness, parallelism, perpendicularity or run-out matters, retain the actual drawing callout and its reference features. ISO 1101:2017 defines the symbol language and interpretation rules for geometric specifications; it does not select the correct tolerance for a buyer’s assembly. Where the drawing names datums, identify the datum features and relationships rather than asking a grinder to choose a convenient setup reference. ISO 5459:2024 addresses how datums and datum systems are indicated and understood, not a mandated measuring machine.
If a requirement is missing or contradictory, flag it as a decision for the design authority. A quotation can record an assumption for review; it should not silently convert that assumption into an approved drawing value.
Define the surface-texture requirement, not just “smooth”
Identify the surface or surfaces to which each texture callout applies. State the specified parameter, value, units and governing drawing or standard reference. If direction, measurement conditions or a restricted area matter to the function, retain the drawing’s instruction. Do not replace a specified parameter with a generic Ra value or apply one finish to the whole part without approval.
ISO 21920-1:2021 covers how profile surface-texture requirements are indicated in technical product documentation. It is a notation standard, not a default finish requirement for every tooling component. Mitutoyo’s surface-roughness measurement guidance explains why the measurement method and interpretation deserve attention. If an older drawing uses an older notation or does not make its evaluation conditions clear, preserve the original reference and ask for clarification; do not translate it into a new requirement by guesswork.
A visual inspection of a polished-looking surface is not a substitute for a specified texture requirement. Conversely, a texture figure by itself does not prove that a diameter, form or positional requirement is met.
Tell the supplier what condition arrives and what condition must leave
Record the material designation, condition and any heat-treatment, coating or finishing sequence shown on the controlled documentation. Say whether stock or a partly machined component would be supplied by the buyer. For a proposed buyer-supplied part, provide the drawing, actual incoming dimensions and condition, the remaining stock available for grinding on each relevant feature, and the required finished limits. Identify the datum features and the inspection or acceptance requirements that must remain valid after finishing. If the stock, datum or incoming condition is unknown, flag it as unresolved rather than asserting that the part can be accepted or recovered.
Do not prescribe a universal grinding allowance or assume that every hardened part is finished in the same sequence. Material, geometry, prior processing and the required surface all affect process review. Norton’s grinding-finish discussion describes several process factors that influence finish; it does not establish HESENT’s capability or a guaranteed result for a quoted part.
If a finish or coating follows grinding, specify which dimensions and surfaces are accepted before or after that step. If the drawing and purchase request disagree, resolve the governing revision before price or inspection scope is finalized.
Agree on acceptance and evidence before ordering
Mark the critical characteristics that require verification, and state any required inspection record or acceptance condition. For each one, identify the drawing callout and whether the requirement applies to the loose component, the installed component, or a subsequent processed condition. The inspection approach and any documentation supplied should be agreed for the actual part; this article does not promise a specific instrument, certificate package or sampling plan.
Ask how a proposed deviation will be handled. The buyer should be able to distinguish a quote to the approved drawing from a quote that depends on an open assumption or proposed change. A changed surface finish, datum, material condition or sequence may affect the assembly; it is not an automatic substitution.
Precision-grinding RFQ checklist
| Buyer input | What to identify |
|---|---|
| Controlled definition | Part number, revision, units, drawing/model and governing notes |
| Scope | Complete part, specific finishing operation or requirement review; what the buyer supplies |
| Ground features | Exact bores, diameters, faces or other surfaces requiring work |
| Finished size | Limits or drawing-defined fit requirements for each critical feature |
| Geometry | Applicable form, orientation, location or run-out callouts and datum references |
| Surface texture | Parameter, value, units, applicable surface and governing reference |
| Incoming condition | Material, heat-treatment state, known prior processing, incoming dimensions and remaining stock on proposed ground features; flag unknowns |
| Final condition | Subsequent coating or treatment, and whether acceptance is before or after it |
| Mating context | Relevant assembly view, counterpart dimensions and retained components |
| Acceptance | Critical characteristics, drawing datum references, required inspection evidence and unresolved decisions to agree |
| Commercial scope | Quantity, delivery requirement and whether the enquiry is for a sample or repeat order |
This is a preparation checklist, not a list of new mandatory website-form fields. A buyer can begin an enquiry with incomplete information if the gaps are clearly labeled. Feasibility, process scope and acceptance evidence must be confirmed for the specific configuration.
Three enquiry situations
New component from an approved drawing. Mark the ground features and provide the final size, geometry and texture callouts. Include the material condition and quantity. Ask for a quote to the controlled revision, and identify any requested inspection evidence.
Buyer-supplied, partly machined component. Submit the controlled drawing, material and heat-treatment condition, measured incoming dimensions, remaining grinding stock on the features concerned, datum references and required inspection evidence. Identify what must remain untouched and who owns prior processing and transport. This is a request for technical feasibility and supply-scope review, not a promise that HESENT will accept, grind or recover the incoming part. If a datum, dimension or stock allowance is unknown, mark it for review before treating the proposed operation as quotable.
Unresolved functional surface. If the drawing has no agreed texture, datum or fit requirement, provide the mating context and identify the open question. Seek design-authority approval before treating a supplier’s proposal as the final specification.
Buyer questions
Is “precision ground” enough to obtain a comparable quote?
No. Identify the surfaces, finished dimensions, geometric and texture requirements, and the condition in which the part will be supplied and accepted. Otherwise two suppliers may price different work.
Does a surface-roughness value establish fit or run-out?
No. Texture, size and geometric requirements describe different characteristics. Keep each required callout on the drawing and identify the functional interface separately.
Should every surface receive the same roughness callout?
Only if the approved design requires it. Mark the critical surfaces and retain the drawing’s actual requirements. Do not extend a functional-surface callout to unrelated surfaces by assumption.
Must the buyer prescribe the grinding process and inspection instrument?
Not by default. Define the required result and acceptance evidence. If a controlled drawing or contract mandates a process or method, include that requirement. Otherwise discuss the proposed method during feasibility review.
What if the drawing and the incoming part disagree?
Identify the discrepancy before ordering. Provide the available measurement or revision history and state which requirement needs design-authority resolution. A quote should make any assumption visible.
Request a drawing-based grinding review
HESENT’s precision-grinding capability page describes its drawing-review approach for tooling components. Suitability, supply scope and acceptance evidence are confirmed against the submitted requirement; this article does not add a new equipment or tolerance promise.
Request a Quote with the controlled drawing, part reference and revision, quantity, marked ground features, material condition and any open acceptance questions. If asking about a buyer-supplied part, also identify its incoming dimensions, remaining grinding stock, datum references and inspection requirements. State that the proposed scope requires feasibility review; neither part acceptance nor a machining result is assumed. The team can review the request without treating an unresolved specification as an approved value.