An accurate RFQ for a CNC threaded part defines the thread and the surrounding component as one functional specification. Send the controlled model or drawing, the complete thread requirement, usable threaded length, hole geometry and mating-part information—not just a nominal hole size.
This is especially important for precision bushings, pins, sleeves and fixture components. A thread can match the intended screw while another surface controls location, alignment or seating. The quotation should reflect both requirements without leaving the supplier to infer how the assembly works.
Define what the model and drawing control
A 3D model communicates geometry, but its appearance does not necessarily communicate the required thread class, usable depth or acceptance conditions. A cosmetic thread, a plain cylindrical hole and a fully modeled helix can carry different information depending on the data provided.
Identify the authoritative data set and revision. State whether the model defines geometry with drawing notes supplying additional requirements, or whether a controlled drawing defines the part and the model supports it. If the files disagree, identify the conflict for resolution rather than expecting the supplier to choose.
ISO 16792:2021 recognizes both model-only and model-plus-drawing approaches to digital product definition. That does not mean an unannotated model necessarily contains every manufacturing requirement.
For the threaded features, make the specification readable independently of a shaded CAD view. Confirm that thread information remains available in the files actually submitted. Xometry’s drawing and design Q&A addresses technical-print callouts and the possibility of losing product-definition information during file conversion.
Give each threaded feature a complete specification
A nominal diameter is not a complete thread requirement. Identify the thread system or governing specification, size, pitch or threads per inch, internal or external form, tolerance class, and handedness where relevant. Define whether the thread is through or blind and identify the feature to which the callout applies.
Keep the thread tolerance class distinct from the general dimensional tolerances for the part. The class does not replace the requirements for a bushing’s outside diameter, a pin’s locating surface, a shoulder position or the thread axis relative to another feature.
Xometry’s thread-callout Q&A identifies thread form, series, size, pitch, fit class and depth as information needed to describe a threaded feature. Use the applicable drawing convention rather than adopting another supplier’s default class.
If an unusual thread, insert interface or proprietary mating feature is involved, identify it explicitly. Do not replace an incomplete designation with the nearest familiar thread.
Apply ISO 965-1:2026 within its actual scope
For general-purpose ISO metric screw threads designated M, ISO 965-1:2026 provides a tolerance system. Its scope references the ISO 261 thread plan and the profiles in ISO 68-1. It is not a single specification for every metric-looking, Unified, pipe or special thread.
ISO lists the 2026 edition as published in April 2026 and the previous 2013 edition and its 2021 amendment as withdrawn. Publication of a new edition does not justify silently changing an RFQ based on an older controlled drawing.
For a legacy requirement, retain the drawing’s cited standard and edition in the enquiry. Identify any conflict with the current purchasing specification and obtain an agreed resolution before ordering. If the edition is unspecified, ask which reference governs rather than inventing one.
The RFQ should identify the applicable thread requirements, not simply request “ISO tolerance.” This guide does not supply numerical thread limits or select a tolerance class for the buyer.
Separate usable thread depth from total hole depth
For a blind threaded hole, “depth” can refer to several different things. Define the reference face and the intended start and end of each requirement.
In the RFQ, explain what effective thread depth means for the design. State the required usable length of complete thread and its location relative to the specified face. Do not silently count an entry chamfer or incomplete thread runout as usable full-form thread.
| Depth or length | What needs to be defined |
|---|---|
| Usable complete-thread length | The required fully formed portion and its start and end references |
| Total hole depth | The extent of the hole and the intended bottom definition |
| Machining allowance below the thread | Any design restriction on space for the chosen production route |
| Assembly engagement | The overlap of mating threads in the intended installed condition |
A hole dimension to a drill point is not the same description as the depth of its full-diameter portion. Show the intended geometry where that difference matters. A through hole also needs a clear statement of the required threaded extent; “through hole” alone does not explain whether the thread must continue through it.
OSG’s tap-chamfer explanation distinguishes effective thread length, chamfer length and incomplete thread length. It demonstrates why tapping travel and finished usable thread are different quantities.
Specify the finished requirement and any bottom-space constraint. Leave the production route for manufacturability review unless the drawing requires a particular method. Do not convert a supplier’s preferred depth ratio or tool-access allowance into a universal design rule.
Describe the mating function and the surrounding fits
Provide the mating component’s controlled reference or specification where available. Explain whether the thread fastens a component, accepts an extraction tool, provides an adjustment, or performs another defined function.
Thread engagement in the assembled condition is not automatically equal to the depth of thread available in either part. Shoulders, counterbores, entry features and the mating component’s length can affect where the assembly seats. Required engagement and strength must come from the design; this RFQ checklist is not a load-rating calculation.
For a precision cylindrical component, identify separately:
- The surface that locates the part in its housing.
- The face or shoulder that establishes axial seating.
- Any required relationship between the thread axis and locating surfaces.
- The available space for the mating component and any restriction on bottoming.
- Whether an existing mating part will remain or both components are being specified together.
If treatment or finishing is required, state the condition in which the thread and mating dimensions must meet acceptance requirements. Identify any surfaces that must remain untreated. Ask for clarification of an unresolved condition rather than assuming that another supplier’s finishing convention applies.
A screw entering the part does not by itself establish that all specified thread, positioning and seating requirements have been met. Define the characteristics to be accepted and agree any requested verification method before the order.
Illustrative RFQs for bushings, pins and CNC components
The following are illustrative purchasing situations, not customer case histories or pre-approved supply configurations.
A precision bushing with a threaded feature
A bushing enquiry includes a locating outside diameter and an internal thread. The buyer should specify the housing interface, thread requirement, seating face and any required relationship between their axes. The thread class does not define the outside fit.
If the housing will remain unchanged, identify that retained interface. If a material or finish change is proposed, list it separately from the request to reproduce the original geometry.
A locating pin with a blind extraction thread
A pin has a locating body and a threaded hole intended for a removal tool. Define the locating dimensions independently from the extraction-thread size and usable depth. Identify the thread entry face, hole-bottom restriction and mating-tool reference if available.
The extraction thread does not establish the pin’s locating fit or a permitted pulling load. Any such requirement needs its own design basis.
A fixture component with several blind threaded holes
A machined block contains threaded features near shoulders or other holes. Identify each thread on the drawing and distinguish usable thread depth, total hole depth and any prohibited breakthrough.
Include the relevant positional requirements and reference faces. A pattern of visible holes in a model should not leave the supplier to infer which holes are threaded or which faces control the assembly.
Use a thread-specific RFQ checklist
Begin with the part reference, current files and quantity. Then complete the information relevant to the threaded features. Mark an unknown requirement as an open question rather than filling it with a guessed value.
| RFQ item | Information to provide |
|---|---|
| Controlled definition | Part and drawing/model references, revisions, units and data precedence |
| Feature identification | Which holes or external sections require threads |
| Thread specification | System, size, pitch, class, applicable standard and edition |
| Thread configuration | Internal or external, handedness, blind or through, relevant entry details |
| Depth and length | Usable full-thread requirement, its reference faces, hole extent and bottom restrictions |
| Mating requirement | Counterpart reference, intended engagement, seating condition and retained parts |
| Precision interfaces | Locating diameters, bores, shoulders, datums and required geometric relationships |
| Material and finish | Drawing-defined material and condition, treatment requirements and final acceptance condition |
| Acceptance | Critical characteristics and any verification requirements to be agreed |
| Commercial scope | Quantity, repeat requirement if known, destination and requested schedule |
These inputs support different purchasing routes. For a repeat or drawing-based order, identify the approved revision and requirements that must remain unchanged. For a replacement, add the retained mating component and distinguish sample measurements from drawing requirements. For a proposed change, keep the original specification visible and identify the change for review.
The broader commercial and drawing-package steps are covered in HESENT’s general precision-component RFQ guide. The checklist here adds thread-specific information rather than replacing that process.
Technical buyer FAQs
Is a 3D model enough to request a quote?
It can start a review, but confirm which requirements the supplied data actually contain. Thread designation, class, usable depth, standards and acceptance conditions must be available in the agreed definition, not inferred from appearance.
Must I model every thread helix?
Not as a blanket rule. A complete thread callout may carry the requirement without a modeled helix. Agree the submitted geometry and supporting definition with the supplier, especially for unusual profiles; do not copy another quoting platform’s input rules.
Does total hole depth define effective thread depth?
No. Specify the usable complete-thread portion and its reference separately. The hole may include entry geometry, incomplete thread or bottom space that does not provide the required full-form thread.
Does a thread class define the fit of a precision bushing or pin?
No. Specify the thread class and the locating diameter or bore requirements separately. Add any required relationship between the threaded feature and those precision surfaces.
Should an old drawing automatically be updated to ISO 965-1:2026?
No automatic change should be made. Identify the cited edition and any conflicting requirement, then agree the controlling specification. First confirm that the thread is within the relevant standard’s scope.
What if the mating component or a dimension is unknown?
Send the available drawing or reference, quantity and known mating information. If available, add photos and clearly identified measurements. Unknown requirements remain review questions rather than approved production values.
Send your CNC threaded-part requirement for review
HESENT reviews drawing-based enquiries for CNC precision components, including pins, bushings, sleeves and other custom parts. Feasibility and supply scope are confirmed against the submitted requirements.
Request a quote with the model or drawing, revision, quantity and thread designation. If available, include usable thread depth, hole geometry, mating-part details and any unresolved questions. The website accepts PDF, DWG, STEP/STP, JPG and PNG.